Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼
Monitor
System
Access
and
Performance
350
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Enable the WAN Traffic Meter
If your ISP charges by traffic volume over a given period, or if you want to study traffic types
over a period, you can activate the traffic meter for IPv4 traffic on the WAN port.
over a period, you can activate the traffic meter for IPv4 traffic on the WAN port.
To configure and monitor traffic limits on the WAN port:
1.
Select Monitoring > Traffic Meter. The Broadband Traffic Meter screen displays.
The Internet Traffic Statistics section in the lower part of the screen displays statistics on
Internet traffic through the WAN port. If you have not enabled the traffic meter, these
statistics are not available.
Internet traffic through the WAN port. If you have not enabled the traffic meter, these
statistics are not available.
Figure 207.
2.
Enter the settings as described in the following table: