Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼
LAN Configuration
68
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To delete one or more secondary LAN IP addresses:
1.
On the LAN Multi-homing screen for IPv4 (see the previous figure), select the check box
to the left of each secondary IP address that you want to delete, or click the Select All
table button to select secondary IP addresses.
to the left of each secondary IP address that you want to delete, or click the Select All
table button to select secondary IP addresses.
2.
Click the Delete table button.
Manage IPv4 Groups and Hosts (IPv4 LAN Groups)
•
•
•
69) contains a list of all known computers and network devices that are assigned
dynamic IP addresses by the wireless VPN firewall, have been discovered by other means,
or were entered manually. Collectively, these entries make up the network database.
or were entered manually. Collectively, these entries make up the network database.
The network database is updated by these methods:
•
DHCP client requests. When the DHCP server is enabled, it accepts and responds to
DHCP client requests from computers and other network devices. These requests also
generate an entry in the network database. This is an advantage of enabling the DHCP
server feature.
DHCP client requests from computers and other network devices. These requests also
generate an entry in the network database. This is an advantage of enabling the DHCP
server feature.
•
Scanning the network. The local network is scanned using Address Resolution Protocol
(ARP) requests. The ARP scan detects active devices that are not DHCP clients.
(ARP) requests. The ARP scan detects active devices that are not DHCP clients.
Note:
In large networks, scanning the network might generate unwanted
traffic.
traffic.
Note:
When the wireless VPN firewall receives a reply to an ARP request,
it might not be able to determine the device name if the software
firewall of the device blocks the name.
it might not be able to determine the device name if the software
firewall of the device blocks the name.
•
Manual entry. You can manually enter information about a network device.
These are some advantages of the network database:
•
Generally, you do not need to enter an IP address or a MAC address. Instead, you can
select the name of the desired computer or device.
select the name of the desired computer or device.
•
You do not need to reserve an IP address for a computer in the DHCP server. All IP
address assignments made by the DHCP server are maintained until the computer or
address assignments made by the DHCP server are maintained until the computer or