Netgear FVS318N – Prosafe Wireless N VPN Firewall 참조 매뉴얼
LAN Configuration
85
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To delete one or more advertisement prefixes:
1.
On the RADVD screen for the LAN (see
82), select the check box to
the left of each advertisement prefix that you want to delete, or click the Select All table
button to select all advertisement prefixes.
button to select all advertisement prefixes.
2.
Click the Delete table button.
Configure IPv6 Multihome LAN IP Addresses on the
Default VLAN
Default VLAN
If you have computers using different IPv6 networks in the LAN (for example, FEC0::2 or
FEC0::1000:10), you can add aliases to the LAN ports and give computers on those
networks access to the Internet, but you can do so only for the default VLAN.
FEC0::1000:10), you can add aliases to the LAN ports and give computers on those
networks access to the Internet, but you can do so only for the default VLAN.
The IP address that is assigned as a secondary IP address needs to be unique and cannot
be assigned to a VLAN.
be assigned to a VLAN.
Make sure that any secondary LAN addresses are different from the primary LAN, WAN, and
DMZ IP addresses and subnet addresses that are already configured on the wireless VPN
firewall. The following is an example of correctly configured IPv6 addresses:
DMZ IP addresses and subnet addresses that are already configured on the wireless VPN
firewall. The following is an example of correctly configured IPv6 addresses:
•
WAN IP address. 2000::e246:9aff:fe1d:1a9c with a prefix length of 64
•
DMZ IP address. 176::e246:9aff:fe1d:a1bc with a prefix length of 64
•
Primary LAN IP address. FEC0::1 with a prefix length of 10
•
Secondary LAN IP address. 2001:db8:3000::2192 with a prefix length of 10.
To add a secondary LAN IPv6 address:
1.
Select Network Configuration > LAN Setup > LAN Multi-homing.
2.
In the upper right of the screen, select the IPv6 radio button. The LAN Multi-homing screen
displays the IPv6 settings. (The following figure contains one example.)
displays the IPv6 settings. (The following figure contains one example.)
Figure 44.
The Available Secondary LAN IPs table displays the secondary LAN IP addresses added
to the wireless VPN firewall.
to the wireless VPN firewall.