Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Show Commands
330
ProSAFE Dual WAN Gigabit Firewall with SSL & IPsec VPN
WAN Traffic Meter Show Command
This section describes the show system traffic_meter setup <wan
interface>
command.
show system traffic_meter setup <wan
interface>
This command displays the configuration of the traffic meter and the Internet traffic statistics.
For the WAN interface, type WAN1 or WAN2.
For the WAN interface, type WAN1 or WAN2.
Enable Traffic Meter
____________________
Traffic Meter is Enabled
Limit Type Both Directions
Monthly Limit in (MB): 255000
Increase this month limit: Enabled
Increase limit by in (MB): 125000
This month limit:
Traffic Counter
________________
Traffic Counter: Specific Time
Restart Time (HH:MM-Day of Month): 12:0 AM - 1
Send e-mail before restarting: Enabled
When Limit is reached
______________________
Traffic Block Status: Block All Traffic Except Email
Send e-mail alert: Enabled
Internet Traffic Statistics
____________________________
Start Date / Time: Fri Jan 24 10:48:54 2014
Outgoing Traffic Volume: 0
Incoming Traffic Volume: 0
Average per day: 0
% of Standard Limit: 0
% of this Month's Limit: 0