Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Net Mode Configuration Commands
54
ProSAFE Dual WAN Gigabit Firewall with SSL & IPsec VPN
net siit configure
This command enables and configures Stateless IP/ICMP Translation (SIIT). After you issue
the net siit configure command, you enter the net-config [siit] mode and then you can
enable SIIT and configure the IPv4 address.
the net siit configure command, you enter the net-config [siit] mode and then you can
enable SIIT and configure the IPv4 address.
Step 1
Format
Mode
net
Step 2
Format
Mode
net-config [siit]
Keyword
Associated Keyword to
Select or Parameter to Type
Description
enable
Y
or N
Enables or disables SIIT.
ipv4_address
subnet mask
The IPv4 address for the SIIT configuration.
Command example:
FVS336Gv2> net siit configure
net-config[siit]> enable Y
net-config[siit]> ipv4_address 192.168.5.117
net-config[siit]> save
net-config[siit]> enable Y
net-config[siit]> ipv4_address 192.168.5.117
net-config[siit]> save
Related show command:
IPv6 Tunnel Commands
This section describes the following commands:
•
•
•
•
net siit configure
enable {Y | N}
ipv4_address <ipaddress>