Netgear FVS336Gv2 – ProSafe Dual WAN Gigabit Firewall with SSL & IPSec VPN 참조 매뉴얼
Net Mode Configuration Commands
81
ProSAFE Dual WAN Gigabit Firewall with SSL & IPsec VPN
IPv4 DMZ Setup Command
This section describes the net dmz ipv4 configure command.
net dmz ipv4 configure
This command enables, configures, or disables the IPv4 DMZ. After you issue the net dmz
ipv4 configure
ipv4 configure
command, you enter the net-config [dmz-ipv4] mode and then you can
configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
order that you prefer.
Step 1
Format
Mode
net
Step 2
Format
enable_ldap
{Y | N}
ldap_serverip
<ipaddress>
ldap_search_base <search base>
ldap_port <number>
Mode
net-config [dmz-ipv4]
net dmz ipv4 configure
enable_dmz {Y | N}
ip_address <ipaddress>
subnet_mask <subnet mask>
dhcp_mode {None | DHCP-Server | DHCP-Relay}
dns_proxy_enable {Y | N}
domain_name <domain name>
starting_ip_address <ipaddress>
ending_ip_address <ipaddress>
primary_dns_server <ipaddress>
secondary_dns_server <ipaddress>
wins_server <ipaddress>
lease_time <hours>
relay_gateway <ipaddress>
Keyword
Associated Keyword to
Select or Parameter to Type
Description
enable_dmz
Y
or N
Enables or disables the DMZ.
ip_address
ipaddress
The IP address of the DMZ port.
subnet_mask
subnet mask
The subnet mask of the DMZ port.