Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 참조 매뉴얼
ProSafe VPN Firewall FVS318v3 Reference Manual
Advanced Virtual Private Networking
5-27
v5.0, January 2012
a. Using our example, log in to the FVS318v3 on LAN A, go to the main menu Maintenance
section and click the Diagnostics link.
b. To test connectivity to the WAN port of Gateway B, enter 22.23.24.25, and then click
Ping.
c. This causes a ping to be sent to the WAN interface of Gateway B. Within two minutes, the
ping response should change from timed out to reply. You may have to run this test several
times before you get the reply message back from the target FVS318v3.
times before you get the reply message back from the target FVS318v3.
d. At this point the connection is established.
6. To view the FVS318v3 event log and status of Security Associations, follow these steps:
a. Go to the FVS318v3 main menu VPN section and click the VPN Status link.
b. The log screen displays a history of the VPN connections, and the IPSec SA and IKE SA
tables will report the status and data transmission statistics of the VPN tunnels for each
policy.
policy.
Note: If you want to ping the FVS318v3 as a test of network connectivity, be sure
the FVS318v3 is configured to respond to a ping on the Internet WAN port
by checking the check box seen in
by checking the check box seen in
. However, to
preserve a high degree of security, you should turn off this feature when
you are finished with testing.
you are finished with testing.