Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 참조 매뉴얼

C-20

Sample VPN Configurations with FVS318v3

–

Subnet Mask: 255.255.255.0 (in this example)

3. Log in to the FVL328 labeled Gateway B as in the illustration (

Log in at the default address of 

 with the default user name of admin and 

default password of password (or using whatever password and LAN address you have 
chosen).

4. Repeat the process using the VPN Wizard to configure the FVL328 at Gateway B.

Follow the steps listed in 

 and 

, but use the following parameters instead 

: 

•

Connection Name: Scenario_1 (in this example)

•

Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel 
endpoints

•

Remote WAN IP address: 14.15.16.17 (in this example), must be unique at each VPN 
tunnel endpoint

•

Remote LAN IP Subnet

–

IP Address: 10.5.6.1 (in this example), must be unique at each VPN tunnel endpoint

–

Subnet Mask: 255.255.255.0 (in this example)

All traffic from the range of LAN IP addresses specified on FVS318v3 A and FVL328 B will now 
flow over a secure VPN tunnel once the VPN tunnel is initiated (see 

Note: Based on the network addresses used in this example, you would log in to the 

LAN IP address of 

 at Gateway B.