Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 참조 매뉴얼

3-14

Firewall Protection and Content Filtering

Be sure to click Apply when you have finished configuring this page.

The VPN firewall uses the Network Time Protocol (NTP) to obtain the current time and date from 
one of several Network Time Servers on the Internet. In order to localize the time for your log 
entries, you must specify your Time Zone:

•

Time Zone. Select your local time zone. This setting will be used for the blocking schedule 
and for time-stamping log entries.

•

Daylight Savings Time. Check this box for daylight savings time.

Note: If your region uses Daylight Savings Time, you must manually select Adjust for 
Daylight Savings Time on the first day of Daylight Savings Time, and unselect it at the end. 
Enabling Daylight Savings Time will add one hour to the standard time.

Be sure to click Apply when you have finished configuring this menu.

Note: Enter the values as 24-hour time. For example, to specify 10:30 am, enter 10 hours 

and 30 minutes; for 10:30 pm, enter 22 hours and 30 minutes.