Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 참조 매뉴얼
ProSafe VPN Firewall FVS318v3 Reference Manual
2-8
Connecting the Firewall to the Internet
v5.0, January 2012
Table 2-1. Ways to access the firewall
Firewall State
Access Options
Description
Factory Default
Note: The VPN
firewall is supplied in
the factory default
state. Also, the
factory default state
is restored when you
use the factory reset
button. See
firewall is supplied in
the factory default
state. Also, the
factory default state
is restored when you
use the factory reset
button. See
information on this
feature.
feature.
Automatic Access via
the Smart Wizard
Configuration
Assistant
the Smart Wizard
Configuration
Assistant
Any time a browser is opened on any computer connected to
the VPN firewall, the VPN firewall will automatically connect
to that browser and display the Configuration Assistant
welcome page.
the VPN firewall, the VPN firewall will automatically connect
to that browser and display the Configuration Assistant
welcome page.
There is no need to enter the VPN firewall URL in the
browser, or provide the login user name and password.
browser, or provide the login user name and password.
Manually enter a URL
to bypass the Smart
Wizard Configuration
Assistant
to bypass the Smart
Wizard Configuration
Assistant
You can bypass the Smart Wizard Configuration Assistant
feature by typing
feature by typing
http://www.routerlogin.net/basicsetting.htm
in the browser address bar and pressing Enter. You will not
be prompted for a user name or password.
be prompted for a user name or password.
This will enable you to manually configure the VPN firewall
even when it is in the factory default state. When manually
configuring the firewall, you must complete the configuration
by clicking Apply when you finish entering your settings. If
you do not do so, a browser on any PC connected to the
firewall will automatically display the firewall's Configuration
Assistant welcome page rather than the browser’s home
page.
even when it is in the factory default state. When manually
configuring the firewall, you must complete the configuration
by clicking Apply when you finish entering your settings. If
you do not do so, a browser on any PC connected to the
firewall will automatically display the firewall's Configuration
Assistant welcome page rather than the browser’s home
page.
Configuration
Settings Have Been
Applied
Settings Have Been
Applied
Enter the standard
URL to access the
VPN firewall
URL to access the
VPN firewall
Connect to the VPN firewall by typing either of these URLs in
the address field of your browser, then press Enter:
the address field of your browser, then press Enter:
http://www.routerlogin.net
http://www.routerlogin.com
The VPN firewall will prompt you to enter the user name of
admin and the password. The default password is
password.
admin and the password. The default password is
password.
Enter the IP address
of the VPN firewall
of the VPN firewall
Connect to the VPN firewall by typing the IP address of the
VPN firewall in the address field of your browser, then press
Enter. 192.168.0.1 is the default IP address of the VPN
firewall. The VPN firewall will prompt you to enter the user
name of admin and the password. The default password is
password.
VPN firewall in the address field of your browser, then press
Enter. 192.168.0.1 is the default IP address of the VPN
firewall. The VPN firewall will prompt you to enter the user
name of admin and the password. The default password is
password.