Netgear FVS318Gv2 – ProSAFE VPN Firewall Series 참조 매뉴얼

When the download is complete, browse to the download location you specified, and verify 

that the file was downloaded successfully.

(Optional) Send the file to NETGEAR technical support for analysis.

You can perform a remote reboot, for example, when the VPN firewall seems to be unstable 
or is not operating normally.

Rebooting breaks any existing connections either to the VPN firewall (such as your 
management session) or through the VPN firewall (for example, LAN users accessing the 
Internet). However, connections to the Internet are automatically reestablished when 
possible.



Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.

The NETGEAR Configuration Manager Login screen displays. 

b.  In the Username field, enter admin and in the Password / Passcode field, enter 

password.

Use lowercase letters. If you changed the password, enter your personalized 
password. Leave the domain as it is (geardomain).

c.  Click the Login button.

The Router Status screen displays. After five minutes of inactivity, which is the default 
login time-out, you are automatically logged out.

Select Monitoring > Diagnostics. 

The Diagnostics screen displays the IPv4 settings.

Specify the IP version for the screen that you want.

In Router Options section of the screen, next to Reboot the Router, click the Reboot button.

The VPN firewall reboots. The Diagnostics screen might remain visible during the reboot 
process, or a status message with a counter might show the number of seconds left until 
the reboot process is complete. The reboot process takes about 165 seconds.