Netgear WG302v1 - ProSAFE 54 Mbps Wireless Access Point 참조 매뉴얼

2-28

Basic Installation and Configuration

5. From the Network Authentication drop-down menu, select WPA2 with RADIUS from the 

list. By default, Data Encryption will be set to AES.

6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless 

clients will not be able to communicate with each other. (This feature is intended for hotspots 
and other public access situations.

7. Click Apply to save your settings.

Not all wireless adapters support WPA2. Furthermore, client software is required on the client. 
Make sure your client card supports WPA2. Consult the product document for your wireless 
adapter and WPA2 client software for instructions on configuring WPA2 settings.

To configure WPA2-PSK:

1. From the Network Authentication drop-down menu, select WPA2-PSK from the list. By 

default, Data Encryption will be set to AES.

2. Enter the preshared key passphrase (Network Key).

3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless 

clients will not be able to communicate with each other. (This feature is int4nded for hotspots 
and other public access situations.

4. Click Apply to save your settings.