Netgear WG302v1 - ProSAFE 54 Mbps Wireless Access Point 참조 매뉴얼
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
Basic Installation and Configuration
2-31
v4.0, April 2006
.
2. Enter the WPA Passphrase (Network Key).
3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
and other public access situations.
4. Click Apply to save your settings.
Restricting Wireless Access by MAC Address
The optional Access Control window lets you block the network access privilege of any specified
stations through the WG302 Wireless Access Point. This provides an additional layer of security.
stations through the WG302 Wireless Access Point. This provides an additional layer of security.
To restrict access based on MAC addresses:
1. Log in to the WG302 using the default address of http://192.168.0.228, user name of admin
and default password of password, or whatever LAN address and password you have set up.
2. Under Security on the main menu, select Access Control. The Access Control screen will
display.
3. Check the Turn Access Control On radio box.
Figure 2-18.