Netgear Business Central Wireless Manager (BCWM) 사용자 설명서
(Continued)
Description
Setting
The access point is registered with the application, cloud managed,
connected to the Internet, and connected to the application.
connected to the Internet, and connected to the application.
Connected
Cloud Connectivity
Status
Status
Although the access point is registered with the application and is cloud
managed, it is disconnected from the application. This situation could occur
when a cable is unplugged, the Internet connection is down, a gateway
cannot be reached, a DNS name cannot be resolved, and so on.
managed, it is disconnected from the application. This situation could occur
when a cable is unplugged, the Internet connection is down, a gateway
cannot be reached, a DNS name cannot be resolved, and so on.
If you reset an access point to the factory default state, the access point
restarts in the Disconnected state.
restarts in the Disconnected state.
Disconnected
How the Configuration of a Cloud-Managed Access Point
Can Be Changed
Can Be Changed
The configuration of a cloud-managed access point can be changed in the following ways:
•
BCWM application. The BCWM application can configure the access point settings but provides only
a subset of the complete configurable settings of an access point.
a subset of the complete configurable settings of an access point.
•
Web management interface of the access point. When an access point is cloud managed, its web
management is in restricted mode, allowing you to configure only a few select settings.
management is in restricted mode, allowing you to configure only a few select settings.
•
CLI through an SSH, Telnet, or console session to the access point. You can configure all access
points settings through the CLI, using an SSH, Telnet, or console session to the access point (not all
these access options are available on all access point models). However, when the BCWM application
pushes a configuration to the access point (for example, after the access point restarts), all settings that
you made through the CLI are overwritten and lost.
points settings through the CLI, using an SSH, Telnet, or console session to the access point (not all
these access options are available on all access point models). However, when the BCWM application
pushes a configuration to the access point (for example, after the access point restarts), all settings that
you made through the CLI are overwritten and lost.
•
SNMP management station connected to the access point. You can configure all access point
settings through SNMP commands from an SNMP management station that is connected to the access
point. However, when the BCWM application pushes a configuration to the access point (for example,
after the access point restarts), all settings that you made through SNMP commands are overwritten
and lost.
settings through SNMP commands from an SNMP management station that is connected to the access
point. However, when the BCWM application pushes a configuration to the access point (for example,
after the access point restarts), all settings that you made through SNMP commands are overwritten
and lost.
Convert an Access Point From Cloud-Managed to
Standalone
Standalone
You can convert an access point from a cloud-managed access point to a standalone access point. Once
converted, the access point is running the same firmware version that was used for the cloud-managed
mode but is now in standalone mode with a full rather than restricted web management interface.
converted, the access point is running the same firmware version that was used for the cloud-managed
mode but is now in standalone mode with a full rather than restricted web management interface.
To convert an access point from a cloud-managed access point to a standalone access
point:
point:
1.
Open a browser on your computer.
2.
In the address bar, enter https://bc.netgear.com.
Cloud-Managed Access Points
148
Business Central Wireless Manager 2.1 Application