Netgear Business Central Wireless Manager (BCWM) 사용자 설명서
By default, the SSID is broadcast. If you disable broadcast of the SSID (effectively, hide the SSID from
users), only users who know the SSID can connect to the WiFi network. This is a method to enhance
security.
users), only users who know the SSID can connect to the WiFi network. This is a method to enhance
security.
9.
To change the network name (SSID), enter a new name in the SSID field.
You can use up to and including 32 ASCII printable (typeable) characters. Do not use extended ASCII
characters, control ASCII characters, or ASCII characters that you compose with the Alt key on your
keyboard.
characters, control ASCII characters, or ASCII characters that you compose with the Alt key on your
keyboard.
10.
From the Bands menu, select the WiFi band or bands.
The options are 2.4GHz and 5.0GHz Radios, 2.4GHz Radio only, and 5.0GHz Radio only. The default
setting is 2.4GHz and 5.0GHz Radios, which applies to dual-band access points only. If an access
point supports a single band only, the access point broadcasts on that band, unless your selection from
the Bands menu disables that band.
setting is 2.4GHz and 5.0GHz Radios, which applies to dual-band access points only. If an access
point supports a single band only, the access point broadcasts on that band, unless your selection from
the Bands menu disables that band.
11.
To specify a tagged VLAN, select the Specify a tagged VLAN check box, and in the VLAN ID field,
enter the VLAN ID.
enter the VLAN ID.
The VLAN ID is a 12-bit number that identifies the tagged VLAN. If the connection from the access
points to the Internet gateway requires an IEEE 802.1Q VLAN tag, you must specify a VLAN ID. If
multiple WiFi networks operate over the same physical Ethernet link, VLANs can provide isolation and
separation.
points to the Internet gateway requires an IEEE 802.1Q VLAN tag, you must specify a VLAN ID. If
multiple WiFi networks operate over the same physical Ethernet link, VLANs can provide isolation and
separation.
12.
Click the Save button.
A pop-up window opens and displays a warning.
13.
Click the Save button in the pop-up window.
Your settings are saved. Connected clients lose their connection momentarily while the access points
reprogram their settings.
reprogram their settings.
Change the Authentication and Encryption for a WiFi
Network
Network
A cloud-managed WiFi network can function as an open network without authentication and encryption
(which can work well for a public hotspot) or provide authentication and encryption through WPA Personal
(WPA-PSK) or WPA Enterprise. For the latter form of WPA, authentication and accounting occur through a
RADIUS server that you select for the WiFi network. You specify a primary and secondary RADIUS server.
The application must be able to access these RADIUS servers.
(which can work well for a public hotspot) or provide authentication and encryption through WPA Personal
(WPA-PSK) or WPA Enterprise. For the latter form of WPA, authentication and accounting occur through a
RADIUS server that you select for the WiFi network. You specify a primary and secondary RADIUS server.
The application must be able to access these RADIUS servers.
If you select either form of WPA, both WPA and WPA2 devices can connect to the WiFi network, that is,
the default encryption is TKIP+AES. You can select TKIP only, in which case WPA devices can connect to
the WiFi network but WPA2 devices cannot.
the default encryption is TKIP+AES. You can select TKIP only, in which case WPA devices can connect to
the WiFi network but WPA2 devices cannot.
Manage WiFi Networks
49
Business Central Wireless Manager 2.1 Application