Netgear Business Central Wireless Manager (BCWM) 사용자 설명서

In the Serial Number field, enter the precise serial number for the access point.

If you do not enter a correct serial number, you cannot add the access point to the inventory. After you
enter a correct serial number, an image of the associated model displays in the Model field, and the
gray Invalid Serial button changes into the Save button.

In the Device Name field, enter a name for the access point.

The name does not need to be the factory default name.

To register the access point with NETGEAR, keep the Register this device check box selected and
enter your date of purchase in the Purchase Date field.

By default, the Register this device check box is selected. If you do not need or want to register the
access point, clear the check box.

Click the Save button.

Your settings are saved. The access point is added to the inventory. Because the access point is not
deployed at a location, the Inventory Status field in the table shows Decommissioned. After the access
point reconnects to the application, the Connection Status field in the table shows Phoned home (and
a time indication), which confirms that the access point is connected to the application.

If an access point is in inventory and decommissioned, you can deploy it at a location. During the provisioning
process, the application upgrades the access point to the cloud-managed firmware version for the location,
reboots the access point, pushes the location settings to the access point, and reboots the access point
again. This process might take between 5 and 10 minutes.

Open a browser on your computer.

In the address bar, enter https://bc.netgear.com.

The application login page displays.

Enter the email address and password for your BCWM and click the Login button.