Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT 사용자 설명서
Installation and Basic Configuration
25
ProSAFE Single Band 802.11n Wireless Access Point WN203
3.
Click the Apply button.
Configure the Basic Wireless Settings
For proper compliance and compatibility between similar products in your coverage area, you
need to configure the 802.11b/g/n wireless adapter settings correctly, including the operating
channel and country. You also need to configure the basic wireless network settings for
wireless devices to connect to your network. For other wireless features, including wireless
security, see
need to configure the 802.11b/g/n wireless adapter settings correctly, including the operating
channel and country. You also need to configure the basic wireless network settings for
wireless devices to connect to your network. For other wireless features, including wireless
security, see
.
Operating Frequency (Channel) Guidelines
You do not need to change the operating frequency (channel) unless you notice interference
problems or you place the wireless access point near another wireless access point. If you do
change the operating frequency, observe the following guidelines:
problems or you place the wireless access point near another wireless access point. If you do
change the operating frequency, observe the following guidelines:
•
Wireless access points use a fixed channel. You can select a channel that provides the
least interference and best performance. In the United States and Canada, 11 channels
are available.
least interference and best performance. In the United States and Canada, 11 channels
are available.
•
If you are using multiple wireless access points, it is better if adjacent wireless access
points use different radio frequency channels to reduce interference. The recommended
channel spacing between adjacent wireless access points is five channels (for example,
use Channels 1 and 6, or 6 and 11, or 1 and 11).
points use different radio frequency channels to reduce interference. The recommended
channel spacing between adjacent wireless access points is five channels (for example,
use Channels 1 and 6, or 6 and 11, or 1 and 11).
•
In infrastructure mode (which is the default mode for the wireless access point), wireless
clients normally scan all channels, looking for a wireless access point. If more than one
wireless access point is available, and the wireless access points use the same SSID, a
wireless client uses the wireless access point with the strongest signal.
clients normally scan all channels, looking for a wireless access point. If more than one
wireless access point is available, and the wireless access points use the same SSID, a
wireless client uses the wireless access point with the strongest signal.
Configure 802.11b/bg/ng Wireless Settings
The basic Wireless Settings screen lets you configure the wireless mode, SSID, and other
wireless settings.
wireless settings.
WARNING:
If you configure the wireless access point from a wireless computer
and you change the wireless access point’s SSID, channel, or wireless
security settings, you lose your wireless connection when you click
the Apply button. You then need to change the wireless settings of
your computer to match the wireless access point’s new settings.
and you change the wireless access point’s SSID, channel, or wireless
security settings, you lose your wireless connection when you click
the Apply button. You then need to change the wireless settings of
your computer to match the wireless access point’s new settings.
Secondary WINS Server Enter the IP address of the secondary WINS server for the network, if there is
any.
Lease
Enter the period that the DHCP server grants to DHCP clients to use the
assigned IP addresses. The default time is 1 (one day).
assigned IP addresses. The default time is 1 (one day).
Setting
Description