Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT 사용자 설명서

For a new wireless network, print or copy the following form and fill in the settings. For an 
existing wireless network, the network administrator can provide this information. 

Print the form and store the security information in a safe place:

SSID. The service set identifier (SSID) identifies the wireless local area network. You can 
customize it by using up to 32 alphanumeric characters. Write your SSID on the line. 

SSID: ___________________________________ 

The SSID in the wireless access point is the SSID you configure on the wireless adapter 
card. All wireless nodes in the same network need to be configured with the same SSID.

WEP key size and authentication
Choose the key size by circling one: 64, 128, or 152 bits.
Choose the authentication type by circling one: open system or shared key.

Passphrase: ___________________________________ 

Note: If you select shared key, the other devices in the network cannot connect unless 
they are set to shared key and have the same keys in the same positions as those in the 
wireless access point.

WPA-PSK (pre-shared key) and WPA2-PSK
Record the WPA-PSK passphrase:

WPA-PSK passphrase:   ________________________________

Record the WPA2-PSK passphrase:

WPA2-PSK passphrase: ________________________________

WPA RADIUS settings
For WPA, record the following settings for the primary and secondary RADIUS servers:

Server name or IP address: Primary _______________ Secondary ________________ 

Port:                 ___________________________________ 

Shared secret: ___________________________________

WPA2 RADIUS settings
For WPA2, record the following settings for the primary and secondary RADIUS servers:

Server name/IP address: Primary ________________ Secondary _________________ 

Port:                 ___________________________________ 

Shared secret: ___________________________________