Netgear WN203 - ProSAFE® WIRELESS-N SINGLE BAND ACCESS POINT 사용자 설명서

During the restoration process, the wireless access point automatically restarts. The 
restoration process typically takes about one minute. When the Test LED turns off, wait a 
few more seconds before doing anything with the wireless access point.

To restore the factory default settings when you do not know the login user name, login 
password, or IP address, you need to use the Reset to Factory Defaults button on the bottom 
panel of the wireless access point (see 



Using a sharp object, press and hold the Reset to Factory Defaults button for about 
10 seconds to reset the wireless access point to factory default settings.

Pressing the Reset to Factory Defaults button for a few seconds 
simply causes the wireless access point to reboot.

Release the Reset to Factory Defaults button.

During the restoration process, the wireless access point automatically restarts. The 
restoration process typically takes about one minute. When the Test LED turns off, wait a 
few more seconds before doing anything with the wireless access point.

If you do not have physical access to the wireless access point to switch it off and on again, 
you can use the software to reboot the wireless access point.



Select Maintenance > Reset > Reboot AP.

The Reboot AP screen displays: