Netgear WAC104 – Dual Band 802.11ac Wireless Access Point 사용자 설명서

Make sure that the access point is receiving power (its Power LED is lit) and that the WiFi radios are

on (the WiFi LED is lit).

On the WiFi device that you want to connect to your access point, open the software application that

manages your WiFi connections.
This software scans for all WiFi networks in your area.

Look for the access point’s network and select it.
The default WiFi network name (SSID) for the 2.4 GHz radio band and the default SSID for the 5 GHz

radio band are on the product label.

If you already implemented security, enter the WiFi password that you set up for the network.
By default, both default networks are open (that is, unsecured), so you do not need to enter a network

key or password.

We recommend that you implement WiFi security (see 

Click the 

Connect button.

The device connects to the WiFi network of the access point.

Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to a home network

while maintaining security.To use WPS (Push 'N' Connect), make sure that all WiFi devices to be connected

to the network are Wi-Fi certified and support WPS. During the connection process, the client gets the

security settings from the access point so that every device in the network supports the same security

settings.

Make sure that the access point is receiving power (its Power LED is lit) and that the WiFi radios are

on (the WiFi LED is lit).

Check the WPS instructions for your computer or WiFi device.