Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 빠른 설정 가이드
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Configure Volumes, LUNS, Shares, and Security
25
Volume Performance and Configuration on ReadyDATA Platforms
6.
Configure the settings as explained in the following table:
Item
Description
LACP Mode
Select the LACP mode from the drop-down list:
•
Active. The aggregation interface actively transmits LACPDUs to other LACP
devices to set up a link channel. Select this mode for a dynamic LAG with
active LACP.
active LACP.
•
Passive. The aggregation interface responds only to LACPDUs from other
LACP devices. Select this mode for a dynamic LAG with passive LACP.
LACP devices. Select this mode for a dynamic LAG with passive LACP.
LACP Timer
If the LACP mode is set to Active, select a value for the LACP timer from the
drop-down list:
drop-down list:
•
Short. LACPDUs are sent frequently, that is, a short interval occurs between
LACPDU transmissions. This is the default setting.
LACPDU transmissions. This is the default setting.
•
Long. LACPDUs are sent infrequently, that is, a long interval occurs between
LACPDU transmissions.
LACPDU transmissions.
Hash Type
Select one or more check boxes to specify the hash types to be used:
•
Layer 2. The channel link that is established is based on the source and
destination MAC addresses.
destination MAC addresses.
•
Layer 3. The channel link that is established is based on the source and
destination IP addresses.
destination IP addresses.
•
Layer 4. The channel link that is established is based on the source and
destination port numbers.
destination port numbers.
7.
Select Create.
8.
Configure channel bonding on the switch to which the ReadyDATA system is attached.
Note:
For connections to a NETGEAR switch, NETGEAR recommends passive
mode.
Note:
If both the ReadyDATA platform and the device with which the channel link
needs to be established function in passive mode, the channel link cannot be
established. At least one side needs to function in active mode.
established. At least one side needs to function in active mode.
Note:
Because of how the hash algorithms calculate the channel load and the
sequential way that the MAC addresses are arranged on the ReadyDATA system,
NETGEAR recommends using Layer 3 and Layer 4 hash types. The Layer 2 hash
type uses short separation values in the MAC addresses, which might not provide
optimal load balancing.
NETGEAR recommends using Layer 3 and Layer 4 hash types. The Layer 2 hash
type uses short separation values in the MAC addresses, which might not provide
optimal load balancing.