Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드
Manage Shares and LUNs
126
ReadyDATA OS 1.4
4.
Configure the properties as explained in the following table:
Item
Description
Name
The name is provided for information only and cannot be changed.
Target
The target is the address that an iSCSI client (that is, an initiator) needs to access the
LUN group. The Target field is automatically populated, but you can delete the content
by clicking the cross at the right of the field and then replace the content with a custom
target address.
LUN group. The Target field is automatically populated, but you can delete the content
by clicking the cross at the right of the field and then replace the content with a custom
target address.
Require initiators to identify
themselves using CHAP
themselves using CHAP
By default, access to the LUN group is open to the
initiators that you add to the table onscreen. Select this
check box to enable CHAP authentication, and to allow
only authenticated initiators access to the LUN group.
initiators that you add to the table onscreen. Select this
check box to enable CHAP authentication, and to allow
only authenticated initiators access to the LUN group.
Allowed Initiators
Select one of the following radio buttons:
•
Any. Access to the LUN group is granted to all initiators that have information
about the target address. (If CHAP authentication is enabled, access is dependent
on CHAP authentication.)
on CHAP authentication.)
•
Selected. Access to the LUN group is granted to iSCSI qualified names (IQNs)
only. (If CHAP authentication is enabled, access is dependent on CHAP
authentication.)
only. (If CHAP authentication is enabled, access is dependent on CHAP
authentication.)
To add an IQN to the table and allow access to the LUN group:
1.
Click the + button above and on the right of the empty table of initiators.
The Create initiator pop-up screen displays:
The Create initiator pop-up screen displays: