Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드



The Dashboard home screen displays. The status monitoring graphics are located below the 
Hardware section (if a graphic does not display, click the associated heading on the left of the 
screen).

Volume. 

The Volume throughput graphic shows either the number of read and write operations per 
second or the bandwidth consumed per second:

Operations. The range is flexible and depends on your selections from the 
drop-down lists above the graphic. For example, the range can be from 0 to 200 
operations. The upper part of the graphic indicates the number of read operations 
(indicated by positive numbers); the lower part of the graphic indicates the number of 
write operations (indicated by negative numbers).

Bandwidth. The range is flexible and depends on your selections from the drop-down 
lists above the graphic. For example, the range can be from 0 to 4 Mbps. The upper 
part of the graphic indicates the bandwidth consumed for read operations (indicated 
by positive numbers); the lower part of the graphic indicates the bandwidth consumed 
for write operations (indicated by negative numbers).

From the drop-down lists above the graphic, you can adjust the following settings:

Volume. Select all volumes or individual volumes.

Operations. Select the number of operations per second or the bandwidth consumed 
per second.

Period. Select the period over which the operations or bandwidth is measured. You 
can select from five minutes to one year.