Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드
Manage Disks and Volumes
18
ReadyDATA OS 1.4
Supported Disks and Initial Startup
The ReadyDATA 5200 supports up to 12
disks. With optional expansion disk arrays that can
contain either 12 or 24 disks each, you can increase the total number of supported disks
to
to
60. The following figure shows a ReadyDATA 5200 with an optional expansion disk array
that supports 24 disks and another array that supports 12 disks.
that supports 24 disks and another array that supports 12 disks.
The ReadyDATA 516 supports up to 6 disks and does not support expansion disk arrays.
Note:
ReadyDATA systems do not recognize non-NETGEAR disks. When
you insert a non-NETGEAR disk, Dashboard displays the error
message Disk is not signed by NETGEAR. ReadyDATA systems
recognize only disks that you obtain through NETGEAR or a
NETGEAR authorized reseller.
you insert a non-NETGEAR disk, Dashboard displays the error
message Disk is not signed by NETGEAR. ReadyDATA systems
recognize only disks that you obtain through NETGEAR or a
NETGEAR authorized reseller.
For information about adding and removing disks, see the hardware manual for your system.
Figure 1. ReadyDATA 5200 with optional disk expansion arrays as displayed on Dashboard
The first time that you start your ReadyDATA storage system, you can do so with or without
disks installed.
disks installed.
If you start with disks installed, several scenarios are possible, each of which affects the way
that the disks are displayed in the graphical enclosure of Dashboard:
that the disks are displayed in the graphical enclosure of Dashboard:
•
Disks do not contain data:
These disks are made available as unallocated disks.
These disks are made available as unallocated disks.