Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드
Backup, Replication, and Recovery
229
ReadyDATA OS 1.4
12.
Click the Next button.
The window updates showing various job parameters. Only the name for the new share
or LUN and the IP address are required.
or LUN and the IP address are required.
(Optional) Configure the following advanced settings:
Item
Description
Show Progress
Select the check box to view the progress of the data transfer.
Compression
Select the check box to enable data compression during the data transfer. Then
configure the compression rate. By default, compression is disabled.
configure the compression rate. By default, compression is disabled.
Note:
After the data has been transferred, the data is not stored compressed
unless it was already compressed on the source share or LUN.
Compression Level Set the compression level by clicking the up or down arrows
to increase or decrease the level. You can select from 1
through 9. For example, 5 indicates that data is compressed
five times.
through 9. For example, 5 indicates that data is compressed
five times.