Netgear RD521210 – ReadyDATA 5200 12TB SATA Bundle includes RD5200 with 2 x RD5D6LT01 Disk Packs 소프트웨어 가이드
Configure the System Settings
72
ReadyDATA OS 1.4
2.
Configure the settings as explained in the following table:
Item
Description
Enable SNMP
Select the check box to enable SNMP globally; clear the check box to disable
SNMP globally.
SNMP globally.
Community
Enter the community. Normally, you would enter public for a read-only community
and private for a read-write community. You can leave the Community field set to
public (which is the default setting), or specify a private name if you have a more
segregated monitoring scheme.
and private for a read-write community. You can leave the Community field set to
public (which is the default setting), or specify a private name if you have a more
segregated monitoring scheme.
Trap destination
Enter the IP address to which the ReadyDATA sends the traps that it generates.
For information about the types of messages that can be sent, see
For information about the types of messages that can be sent, see
Hosts allowed access
Enter a network address that specifies the hosts that are allowed to access the
ReadyDATA.
ReadyDATA.
3.
Click the Apply button.
Note:
For information about the NETGEAR SNMP MIB, see
166.