Netgear ReadyNAS Remote 전단
Advanced Settings
43
ReadyNAS Remote
The ReadyNAS Remote settings display.
3.
Edit the security settings:
•
Specify Port for Incoming Connections. This feature is disabled by default. If you
want to control the port that your ReadyNAS system uses, select this check box.
want to control the port that your ReadyNAS system uses, select this check box.
Do not use a port that is already in use by other applications on the ReadyNAS
system, such as port 443. If ReadyNAS Remote runs on a port that is already in use,
it starts but cannot continue to run. The green status light turns gray.
system, such as port 443. If ReadyNAS Remote runs on a port that is already in use,
it starts but cannot continue to run. The green status light turns gray.
•
Enable encryption. Encryption is enabled by default. When this check box is
selected, communication between the ReadyNAS Remote client and your ReadyNAS
storage system is encrypted. NETGEAR recommends enabling encryption unless
you are experiencing a slow link. Disabling encryption might improve transfer speed.
selected, communication between the ReadyNAS Remote client and your ReadyNAS
storage system is encrypted. NETGEAR recommends enabling encryption unless
you are experiencing a slow link. Disabling encryption might improve transfer speed.
4.
Click the Apply button.
Your changes are saved.
Manage Logs
You can specify debug levels, maximum number of log entries, and when to flush log entries.
You can also download log files.
You can also download log files.
To configure log settings:
1.
In Dashboard, select System > Settings > Remote Access.