Netgear ReadyRECOVER – ReadyDATA-based Backup Appliance 소프트웨어 가이드
Install and Configure ShadowProtect Agents
29
ReadyRECOVER Software
The target servers can be physical or virtual.
When you are restoring data to hardware that is different from the source hardware, the
hardware independent restore (HIR) process inserts the proper drivers from the Windows
catalog of drivers contained within the recovery environment (RE). If the driver is not present,
you can add your own driver to the HIR process.
hardware independent restore (HIR) process inserts the proper drivers from the Windows
catalog of drivers contained within the recovery environment (RE). If the driver is not present,
you can add your own driver to the HIR process.
Boot the Recovery Environment and Map to the VHDX Stores
To boot the recovery environment and map to the VHDX stores:
1.
Place the recovery environment CD or .iso file into a target server and turn on to boot.
2.
When prompted, click the Yes button to start network support.
3.
When prompted, select the proper time zone.
The PE environment is configured by default for DHCP. If you see an IP address in the
information section on the left-hand panel, you have a properly running network interface.
information section on the left-hand panel, you have a properly running network interface.
4.
To map a network drive, from the left-hand Tools panel, select Network Configuration.