Netgear WAC730- ProSAFE® Business 3 x 3 Dual Band Wireless-AC Access Point 사용자 설명서
Management and Monitoring
73
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
View Dashboard Information
The Dashboard pages provide general information about the access point in standalone
mode or ensemble mode. In addition, the pages provide real-time and historical information
about client distribution, traffic distribution and WLAN utilization.
mode or ensemble mode. In addition, the pages provide real-time and historical information
about client distribution, traffic distribution and WLAN utilization.
View the Standalone Dashboard
The Dashboard page for a standalone access point provides read-only information, so any
changes must be made on other pages.
changes must be made on other pages.
To view the standalone Dashboard:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
A login window opens.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Select Monitoring > Dashboard.
The Dashboard page displays.
5.
Click the Stand-Alone button.
The Dashboard page displays information for the standalone access point.
Current Wireless Settings for 802.11 bg/ng/bgn
and
Current Wireless Settings for 802.11 a/a-na-ac
Access Point Mode
The WiFi operation mode of the access point for the radio band. By default, the
mode is 11bgn for the 2.4 GHz radio band and 11a-na-ac for the 5 GHz radio
band.
mode is 11bgn for the 2.4 GHz radio band and 11a-na-ac for the 5 GHz radio
band.
Channel / Frequency
The channel that the WiFi port is using. For information about how to change the
channel and frequency, see
channel and frequency, see
Rogue AP Detection
Enabled indicates that rogue AP detection is enabled. Disabled indicates that it
is not.
is not.
Setting
Description