Netgear WAC720- ProSAFE® Business 2 x 2 Dual Band Wireless-AC Access Point 사용자 설명서
Advanced Configuration
124
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Configure a WiFi Bridge
In bridge mode, the access point communicates with one or more other bridge-mode access
points. By default, the connection is an open system but you can use WPA2-PSK security to
protect this communication.
points. By default, the connection is an open system but you can use WPA2-PSK security to
protect this communication.
Note:
You cannot configure WiFi bridging when automatic channel selection
is enabled. On the basic Wireless Settings page, make sure that Auto
is not selected from the Channel / Frequency menu (see
is enabled. On the basic Wireless Settings page, make sure that Auto
is not selected from the Channel / Frequency menu (see
To configure a WiFi bridge:
1.
Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
access point or to the access point directly through an Ethernet cable.
2.
In the address bar, enter the IP address of the access point.
A login window opens.
3.
Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Configure the access point (AP1 on LAN Segment 1 in the previous figures) as a
point-to-point bridge:
point-to-point bridge:
a. Select Configuration > Wireless Bridge.
b. Select the Enable Wireless Bridging check box.
c. Click the Apply button.
Your settings are saved and the WiFi bridging feature is enabled. However, you still
must configure one or more WiFi bridges and enable them.
must configure one or more WiFi bridges and enable them.