Netgear WAC720- ProSAFE® Business 2 x 2 Dual Band Wireless-AC Access Point 사용자 설명서
WiFi Configuration and Security
43
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
10.
To assign a captive portal profile to the security profile, select a captive portal instance from
the Profile Name menu (NETGEAR or NETGEAR-1).
the Profile Name menu (NETGEAR or NETGEAR-1).
Note:
To be able to select a captive portal instance, you must configure and
enable at least one captive portal instance and globally enable captive
portals (see
enable at least one captive portal instance and globally enable captive
portals (see
11.
Click the Apply button.
Your settings are saved.
12.
Click the Back button.
The Profile Settings page displays again.
13.
To enable the security profile that you just configured, make sure that the Enable check box
for the profile is selected.
for the profile is selected.
14.
To enable Wireless Multicast Forwarding (WMF) for the security profile that you just
configured, make sure that the WMF-Enable check box is enabled.
configured, make sure that the WMF-Enable check box is enabled.
15.
If you made any changes, click the Apply button again.
Your settings are saved.
WARNING:
If you use a WiFi computer to configure WiFi security settings, you
are disconnected when you click the Apply button. Reconfigure
your WiFi computer to match the new settings, or access the
access point from a wired computer to make further changes.
are disconnected when you click the Apply button. Reconfigure
your WiFi computer to match the new settings, or access the
access point from a wired computer to make further changes.
About WPA2 With RADIUS and WPA & WPA2 With RADIUS
WPA2 and WPA & WPA2 security require RADIUS-based 802.1x authentication, so you also
must define RADIUS server settings. For information about RADIUS servers, see
must define RADIUS server settings. For information about RADIUS servers, see
Setting
Description
Mode
Select the Mode check box to enable the selection of QoS policies and
bandwidth limits.
bandwidth limits.
Policy Details
Select a QoS policy from the Incoming menu, Outgoing menu, or both menus.
Depending on your selection, the policy is applied to incoming packets, outgoing
packets, or both incoming and outgoing packets, and is displayed in the Policy
Details fields.
packets, or both incoming and outgoing packets, and is displayed in the Policy
Details fields.
Bandwidth Limit (bits per
second)
second)
As an option, specify the bandwidth limits in bits per second (bps) for incoming
traffic, outgoing traffic, or both traffic streams. For example, to set a limit of
1 Mbps, enter 1048576 (or round down to 1000000).
1 Mbps, enter 1048576 (or round down to 1000000).