Netgear WAC720- ProSAFE® Business 2 x 2 Dual Band Wireless-AC Access Point 사용자 설명서



Using a sharp object, press and hold the Reset button for about five seconds (until the Test 
LED blinks rapidly) to reset the access point to factory defaults settings.

Pressing the Reset button for a shorter time simply causes the access point to reboot.

Release the Reset button.

During the restoration process, the access point automatically restarts. The restoration 
process typically takes about one minute. When the Test LED turns off, wait a few more 
seconds before doing anything with the access point.

If you cannot physically access the access point to turn it off and on again, you can use the 
software to reboot the access point.



Open a web browser from a computer that is connected to the same network as the 
access point or to the access point directly through an Ethernet cable.

In the address bar, enter the IP address of the access point.

A login window opens.

Enter the user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

Select Maintenance > Reset > Reboot AP.

Select the Yes radio button. 

By default, the No radio button is selected.

Click the Apply button to reboot the access point.

The reboot process typically takes about one minute. When the Test LED turns off, wait a 
few more seconds before doing anything with the access point.