Netgear RPS4000 – Redundant Power System and Power Bank 하드웨어 매뉴얼
17
3
3.
Troubleshooting
Troubleshooting Chart
The following table lists symptoms, causes, and solutions of possible problems.
Table 4. Troubleshooting chart
Problem
Cause
Solution
Power LED is off.
No power is received.
Check the power cord connections for the switch
at the switch and the connected device.
Make sure that all cables used are correct and
comply with Ethernet specifications.
at the switch and the connected device.
Make sure that all cables used are correct and
comply with Ethernet specifications.
RPS port LED is off or
incorrect.
incorrect.
Incorrect switch selections.
Check the operating mode and CS switch
selection.
selection.