Netgear RPS4000 – Redundant Power System and Power Bank 하드웨어 매뉴얼

Power 

Solid green: The RPS4000 power supply is operating normally.
Off: AC power to the RPS4000 is disconnected. 

Power module (1–4) Solid green: An APS1000W is installed and working normally.

Solid yellow: An APS1000W is installed but has failed.
Off: No APS1000W is installed.

RPS (slots 1–4)

Solid green: The RPS4000 detects a compatible switch. Power is provided. 
Blinking green: The RPS4000 detects a compatible switch. No power is provided.
Solid yellow: The RPS4000 detects a switch of pre-RPS4000 design. Power is 
provided.
Blinking yellow: The RPS4000 detects a switch of pre-RPS4000 design. No power 
is provided.
Off: The RPS4000 does not detect a switch or the switch is not recognized.

 

The RPS4000 rear panel has four RPS ports, four sets of Type and CS configuration 
switches, and an AC power receptacle for the RPS4000 (AC power cord supplied).

Use the following safety guidelines to ensure your own personal safety and to help protect 
your system from potential damage. 

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, 
observe the following precautions.

Observe and follow service markings:

Do not service any product except as explained in your system documentation.

Opening or removing covers that are marked with the triangular symbol with a 
lightning bolt can expose you to electrical shock. Only a trained service technician 
should service components inside these compartments.

RPS port

RPS configuration switches

AC power receptacle