Netgear RPS4000 – Redundant Power System and Power Bank 하드웨어 매뉴얼
8
2
2.
Hardware Installation
This chapter explains how to install the RPS.
Package Contents
The package contains the following items:
•
RPS4000
•
Power cord
•
Rubber footpads for tabletop installation
•
Rack-mounting kit
•
Resource CD: The CD includes these documents or links to access them:
-
RPS4000 Installation Guide
-
This hardware installation guide
Protecting against Electrostatic Discharge
WARNING:
Static electricity can harm delicate components inside your
system. To prevent static damage, discharge static electricity from
your body before you touch any of the electronic components,
such as the microprocessor. You can do so by periodically
touching an unpainted metal surface on the switch.
system. To prevent static damage, discharge static electricity from
your body before you touch any of the electronic components,
such as the microprocessor. You can do so by periodically
touching an unpainted metal surface on the switch.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
1.
When unpacking a static-sensitive component from its shipping carton, leave it in the
antistatic package until you are ready to install it. Just before unwrapping the antistatic
package, discharge static electricity from your body.
2.
Before moving a sensitive component, place it in an antistatic container or package.
3.
Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads,
workbench pads, and an antistatic grounding strap.