Netgear AX742 – ProSAFE 24 Gigabit Stacking Kit 설치 가이드
April 2014
Netgear, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Specifi cations
Specifi cations
Description
Standard
IEEE 802.3ak, 10GBASE-CX4
Dimensions (H x W x D)
1.20 in. x 2.92 in. x 6.13 in. (30.5 mm x
74.1 mm x 155.7 mm)
74.1 mm x 155.7 mm)
Weight
0.317 lb (0.144 kg)
Operating temperature
32 –122ºF (0 – 50ºC)
Storage temperature
32 – 158ºF (0 –70ºC)
Operative relative humidity
10 – 90% noncondensing
Max. power consumption
0W
MTBF
885 years (at 25ºC); 252 years (at
55ºC)
55ºC)
Compliance
CE mark, FCC Class A
Regulatory Compliance
Certifi cate of Manufacturer/Importer
It is hereby certifi ed that the NETGEAR model AX742 has been
suppressed in accordance with the condition set out in MBPT-
Amtsb|Vfg 243/1991 and vfg 46/1992. The operation of some
equipment (for example, test transmitters) in accordance with
regulation may, however, be subject to certain restrictions. Please
refer to the note in the operating instructions. Federal Offi
suppressed in accordance with the condition set out in MBPT-
Amtsb|Vfg 243/1991 and vfg 46/1992. The operation of some
equipment (for example, test transmitters) in accordance with
regulation may, however, be subject to certain restrictions. Please
refer to the note in the operating instructions. Federal Offi
ce for
Telecommunications Approvals has been notifi ed of the placing of
this equipment on the market and has been granted the right to
test the series for compliance with regulation.
this equipment on the market and has been granted the right to
test the series for compliance with regulation.
This device has been tested and found to comply with limits for
a Class A digital device, pursuant to part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a commercial installation.
a Class A digital device, pursuant to part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a commercial installation.
Support
Thank you for selecting NETGEAR products.
Aft er installing your device, locate the serial number on the label of your
product and use it to register your product at
product and use it to register your product at
https://my.netgear.com
.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website. For product updates and web support, visit
support. NETGEAR recommends registering your product through the NETGEAR
website. For product updates and web support, visit
http://support.netgear.
com
.
NETGEAR recommends that you use only the offi
cial NETGEAR support
resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/
app/answers/detail/a_id/11621
/.
For regulatory compliance information, visit
http://www.netgear.com/about/
regulatory
/.