Netgear AXM751 – ProSAFE 10GBASE-LR XFP Optics Module 설치 가이드

)NSTALLATION

The 10 Gigabit small form-factor pluggable (XFP) module provides a 
full-duplex 10G bps Ethernet link on NETGEAR managed switches.

The switch will automatically detect the AXM751, so you can simply 
plug it into an available module slot. 

The module can be inserted or removed while the switch is operational.

Insert the module firmly into the slot that supports the XFP interface. 

Make sure the optical cable you use is multi-mode LC to LC duplex 
cable.

Release the module latch by pulling down the handle bar across the 
module, and pull the module out of the module slot. 

Standard

IEEE 802.3ae
10GBase LR

Dimensions (HxWxD)

0.33” x 0.72” x 3.07”
(8.5mm x 18.35mm x 78.0 mm)

Weight

0.1 lb (47g)

Operating Temperature

32- 158 F (0-70c)

Storage Temperature

32-185 F (0-85c)

Operative relative humidity

104 (40c) and 90%

Operating Distance

33m (62um OM1 cable)
82m (50um OM2 cable)
220m (50um OM3 cable)

Connectors

LC MM for 62.5um fiber cable
LC MM for 50um fiber cable

Power Consumption

0.95w (max: 1.37w)

MTBF

1154739 hr (135 years)

Safety Certification

UL 1950
CSA 22.2 No. 950