Netgear GS724Tv1 – ProSAFE 24-port Gigabit Smart Switch 하드웨어 매뉴얼
24
GS716T/GS724T Gigabit Smart Switch
Step 7: Manage the Switch using a Web Browser or the
Smart Control Center Utility
Smart Control Center Utility
The NETGEAR Smart Switch contains software for viewing, changing, and monitoring the
way it works. This management software is not required for the switch to work. The ports can
be used without using the management software. However, the management software
enables the setup of VLAN and Trunking features, and also improves the efficiency of the
switch, which results in the improvement of its overall performance as well as the
performance of the network.
way it works. This management software is not required for the switch to work. The ports can
be used without using the management software. However, the management software
enables the setup of VLAN and Trunking features, and also improves the efficiency of the
switch, which results in the improvement of its overall performance as well as the
performance of the network.
After powering up the switch for the first time, the Smart Switch can be configured using a
Web browser or a utility program called Smart Control Center. For more information about
managing the switch, see the
Web browser or a utility program called Smart Control Center. For more information about
managing the switch, see the
GS716T/GS724T Series Software Administration Manual on
the Smart Switch
Resource CD.
Note:
When the device powers up, there is a default IP address already
configured on the device. The default IP address is 192.168.0.239
and subnet mask 255.255.255.0.
configured on the device. The default IP address is 192.168.0.239
and subnet mask 255.255.255.0.