Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 관리자 가이드
Managing Device Security
176
GS510TP and GS110T Gigabit Smart Switches
•
Service Type. Choose one of the Service Type match conditions for the extended IP
ACL rule. The possible values are IP DSCP, IP precedence, and IP TOS, which are
alternative ways of specifying a match criterion for the same Service Type field in the
IP header, however each uses a different user notation. After you select the service
type, specify the value associated with the type.
alternative ways of specifying a match criterion for the same Service Type field in the
IP header, however each uses a different user notation. After you select the service
type, specify the value associated with the type.
•
IP DSCP: Specify the IP DiffServ Code Point (DSCP) value. The DSCP is defined
as the high-order six bits of the Service Type octet in the IP header. Select an IP
DSCP value from the menu. To specify a numeric value in the available field,
select Other from the menu and type an integer from 0 to 63 in the field.
as the high-order six bits of the Service Type octet in the IP header. Select an IP
DSCP value from the menu. To specify a numeric value in the available field,
select Other from the menu and type an integer from 0 to 63 in the field.
•
IP Precedence: The IP Precedence field in a packet is defined as the high-order
three bits of the Service Type octet in the IP header. This is an optional
configuration. Enter an integer from 0 to 7.
configuration. Enter an integer from 0 to 7.
•
IP TOS Bits: Matches on the Type of Service bits in the IP header when checked.
In the first TOS field, specify the two-digit hexadecimal TOS number. The second
field is for the TOS Mask, which specifies the bit positions that are used for
comparison against the IP TOS field in a packet. The TOS Mask value is a
two-digit hexadecimal number from 00 to ff, representing an inverted (i.e.
wildcard) mask. The zero-valued bits in the TOS Mask denote the bit positions in
the TOS Bits value that are used for comparison against the IP TOS field of a
packet. For example, to check for an IP TOS value having bits 7 and 5 set and bit
1 clear, where bit 7 is most significant, use a TOS Bits value of a0 and a TOS
Mask of 00.
In the first TOS field, specify the two-digit hexadecimal TOS number. The second
field is for the TOS Mask, which specifies the bit positions that are used for
comparison against the IP TOS field in a packet. The TOS Mask value is a
two-digit hexadecimal number from 00 to ff, representing an inverted (i.e.
wildcard) mask. The zero-valued bits in the TOS Mask denote the bit positions in
the TOS Bits value that are used for comparison against the IP TOS field of a
packet. For example, to check for an IP TOS value having bits 7 and 5 set and bit
1 clear, where bit 7 is most significant, use a TOS Bits value of a0 and a TOS
Mask of 00.
3.
To delete an IP ACL rule, select the check box associated with the rule, and then click
Delete.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5.
To modify an existing IP Extended ACL rule, click the Rule ID. The number is a hyperlink to
the Extended ACL Rule Configuration page.
IP Binding Configuration
When an ACL is bound to an interface, all the rules that have been defined are applied to the
selected interface. Use the IP Binding Configuration page to assign ACL lists to ACL
Priorities and Interfaces.
selected interface. Use the IP Binding Configuration page to assign ACL lists to ACL
Priorities and Interfaces.
To display the IP Binding Configuration page, click Security > ACL, then click the Advanced
> IP Binding Configuration link.
> IP Binding Configuration link.