Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 관리자 가이드

In the Transfer File Name field, specify a destination file name for the file to upload. You 

may enter up to 32 characters. The transfer fails if you do not specify a file name. For a code 

transfer, use an

  .stk file extension.

Select the Start File Transfer check box to initiate the file upload. 

Click Apply to begin the file transfer.

The last row of the table displays information about the progress of the file transfer. The 
page refreshes automatically until the file transfer completes or fails.

HTTP File Upload

Use the HTTP File Upload page to upload files of various types from the switch to an 
administrative system using an HTTP session (for example, via your Web browser).

To display this page, click Maintenance > Upload > HTTP File Upload.

To upload a file from the switch to an administrative system by using HTTP:

From the File Type menu, Specify what type of file you want to download to the switch:

Code: The code is the system software image, which is saved in one of two flash 

sectors called images (image1 and image2). The active image stores the active copy; 
while the other image stores a second copy. The device boots and runs from the 
active image. If the active image is corrupt, the system automatically boots from the 
non-active image. This is a safety feature for faults occurring during the boot upgrade 
process.

Text Configuration: A text-based configuration file enables you to edit a configured 

text file (startup-config) offline as needed without having to translate the contents for 
the switch to understand. The most common usage of text-based configuration is to 
upload a working configuration from a device, edit it offline to personalize it for 
another similar device (for example, change the device name, serial number, IP 
address), and download it to that device.