Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 관리자 가이드

IP Configuration

Use the IP Configuration page to configure network information for the management 
interface, which is the logical interface used for in-band connectivity with the switch through 
any of the switch's front panel ports. The configuration parameters associated with the 
switch's network interface do not affect the configuration of the front panel ports through 
which traffic is switched or routed.

To access the page, click System > Management > IP Configuration. A screen similar to the 
following displays.

To configure the network information for the management interface:

Select the appropriate radio button to determine how to configure the network 

information for the switch management interface: 

Dynamic IP Address (DHCP). Specifies that the switch must obtain the IP address 

through a DHCP server. 

Dynamic IP Address (BOOTP). Specifies that the switch must obtain the IP address 
through a BootP server.

Static IP Address. Specifies that the IP address, subnet mask, and default gateway 

must be manually configured. Enter this information in the fields below this radio 
button.

If you selected the Static IP Address option, configure the following network information: 

IP Address. The IP address of the network interface. The factory default value is 

192.168.0.239. Each part of the IP address must start with a number other than zero. 
For example, IP addresses 001.100.192.6 and 192.001.10.3 are not valid.

Subnet Mask. The IP subnet mask for the interface. The factory default value is 

255.255.255.0.

Default Gateway. The default gateway for the IP interface. The factory default value 

is 192.168.0.254.