Netgear GS510TP – ProSAFE 8-Port Gigabit Smart Switch with PoE and 2 fiber SFP ports 관리자 가이드
Configuring Switching Information
88
GS510TP and GS110T Gigabit Smart Switches
The following table describes the MSTP status information displayed on the Spanning Tree
CST Configuration page.
CST Configuration page.
Field
Description
MST ID
Table consisting of the MST instances (including the CST) and the corresponding VLAN IDs
associated with each of them.
associated with each of them.
VID
Table consisting of the VLAN IDs and the corresponding FID associated with each of them
FID
Table consisting of the FIDs and the corresponding VLAN IDs associated with each of them.
Click Refresh to update the information on the screen with the most current data.
CST Port Configuration
Use the Spanning Tree CST Port Configuration page to configure Common Spanning Tree
(CST) and Internal Spanning Tree on a specific port on the switch.
(CST) and Internal Spanning Tree on a specific port on the switch.
To display the Spanning Tree CST Port Configuration page, click Switching > STP >
Advanced > CST Port Configuration.
Advanced > CST Port Configuration.
To configure CST port settings:
1.
To configure CST settings for a physical port, click PORTS.
2.
To configure CST settings for a Link Aggregation Group (LAG), click LAGS.
3.
To configure CST settings for both physical ports and LAGs, click ALL.