Netgear GS724Tv4 – ProSAFE 24-port Gigabit Smart Switch 설치 가이드

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks 
of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject 
to change without notice. © NETGEAR, Inc. All rights reserved.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA

The Smart Control Center Utility finds the switch and displays its MAC 
address, IP address, and model number. 

If the utility does not discover your switch, verify that the cable connections 
are secure and that the IP address configuration of the computer is in the 
same subnet as the switch, and click the Discover button.

Click the row for the switch that you want to configure. 

Click the Web Browser Access button to view the switch Login screen.

Enter the default password of password in lower-case letters and click the 
Login button. 

The System Information screen displays

Configure the switch for your network. 

For more information, see the software administration manual.

Here are some tips for correcting simple problems you might have.

Be sure to power on your computer and switch in the following sequence: 

1. Turn on the switch and wait about two minutes. 

2. Turn on the computer and connect to the switch. 

Make sure the Ethernet cables are plugged in. 

For each powered-on computer connected to the switch, the corresponding 
switch LAN port status LED is lit. 

Make sure the network settings of the computer are correct. 

In most cases, computers should be configured to obtain an IP address 
through DHCP. If your network uses static IP addresses, be sure that the 
switch and computer are configured with valid IP addresses. For more 
information, see the software administration manual.

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product 

and use it to register your product at 

. 

You must register your product before you can use NETGEAR telephone support. 
NETGEAR recommends registering your product through the NETGEAR website. 
For product updates and web support, visit 

.

NETGEAR recommends that you use only the official NETGEAR support 
resources.

For the current EU Declaration of Conformity, visit