Netgear MA111v2 - 11 Mbps Wireless USB Adapter 사용자 설명서

4-2

Configuration

For example, if you use your notebook PC to connect to a wireless network in an office and a 
wireless network in your home, you can create a profile for each wireless network. Then, you can 
easily load the profile that has all the configuration settings you need to join the network you are 
using at the time. 

There are two types of wireless network connections you can configure:

•

Infrastructure Mode — uses the 802.11 infrastructure mode.

•

Ad-hoc Mode — uses the 802.11 ad-hoc mode

For more information on 802.11 wireless network modes, see 

 of this manual.

This section provides instructions for configuring the NETGEAR 11 Mbps Wireless USB Adapter 
MA111 to connect to a wireless access point. 

Follow the instructions below to configure an infrastructure mode profile for connecting to an 
access point.

a.

Make sure the MA111 software is installed and the MA111 is connected to your PC.

b.

Click the 

icon on the Windows desktop or in the system tray to open the Wireless 

Configuration Utility. It opens to the Status tab.

a.

Click the Configuration tab.

b.

Make sure that Infrastructure (Access Point) is selected for the Network Mode.

c.

Enter the SSID. This is also called the Wireless Network Name.

You can type the SSID or select it from the drop-down list. You will not get a wireless 
network connection unless the network SSID matches exactly what is configured in the 
access point. 

Tip: To view a list of the available wireless networks and their SSIDs at your location, 
click the Site Survey tab. 

d.

Click OK.