Netgear MA111v2 - 11 Mbps Wireless USB Adapter 사용자 설명서

C-6

Preparing Your PCs for Network Access

2.

Type winipcfg, and then click OK.

The IP Configuration window opens, which lists (among other things), your IP address, subnet 
mask, and default gateway.

3.

From the drop-down box, select your Ethernet adapter.

The window is updated to show your settings, which should match the values below if you are 
using the default TCP/IP settings that NETGEAR recommends for connecting through a 
router or gateway:

•

The IP address is between 192.168.0.2 and 192.168.0.254

•

The subnet mask is 255.255.255.0

•

The default gateway is 192.168.0.1

As part of the PC preparation process, you may need to install and configure 

 

TCP/IP on each networked PC. Before starting, locate your Windows CD; you may need to insert 
it during the TCP/IP installation process.

To install or verify the necessary components for IP networking:

1.

On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.

Double-click the Network and Dialup Connections icon.

3.

If an Ethernet adapter is present in your PC, you should see an entry for Local Area 
Connection. Double-click that entry.

4.

Select Properties.

5.

Verify that ‘Client for Microsoft Networks’ and ‘Internet Protocol (TCP/IP)’ are present. If 
not, select Install and add them.

6.

Select ‘Internet Protocol (TCP/IP)’, click Properties, and verify that “Obtain an IP address 
automatically is selected.

7.

Click OK and close all Network and Dialup Connections windows.

8.

Then, restart your PC.