Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 사용자 설명서

Managing Security

6-17

•

Max Entries – Enter the maximum number of MAC addresses that can be learned on the 
port. The Max Entries field is enabled only if the Limited Dynamic Lock mode is selected. 
The range is 1-128 entries. The default value is 1.

•

Action – Select the action to be applied to packets arriving on a locked port. The possible 
field values are:

–

Forward – Forwards packets from an unknown source without learning the MAC 
address.

–

Discard – Discards packets from any unlearned source. This is the default value.

–

Shutdown – Discards packets from any unlearned source and shuts down the port. The 
port remains shut down until reactivated or until the device is reset.

•

Trap – Select whether traps are enabled or disabled when a packet from an unknown 
source is received on a locked port. The possible field values are:

–

Enable – Enable traps.

–

Disable – Disable traps. This is the default value.

•

Trap Frequency (Sec) – Enter the frequency at which traps are sent. The field format is in 
seconds. The range is 1-1,000,000. The default value is 10 seconds.

2. Select the port security Status, Learning Mode, Action and Trap status from the lists in the 

provided fields in the first row.

3. Enter the Max Entries and Trap Frequency in the provided fields in the first row.

4. Click Apply to update the device.

Access Control Lists (ACL) allow network managers to define classification actions and rules for 
specific ingress ports. Packets entering an ingress port, with an active ACL, are either admitted or 
denied entry and the ingress port is disabled. If they are denied entry, the user can disable the port.

The ACL menu contains the following options:

•

•

•

•