Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 사용자 설명서

3-3

Managing System Settings

•

System Up Time – Displays the amount of time since the most recent device reset. The 
system time is displayed in the following format: days, hours, minutes, seconds. For 
example, 41 days, 2 hours, 22 minutes, 15 seconds.

•

Idle Timeout – Enter the amount of time (minutes) that elapses before an idle station is 
timed out. Idle stations that are timed out must login to the system. The field range is 5 - 
30 minutes. The field default value is 10 minutes.

•

Base MAC Address – Displays the MAC address of a standalone device. 

•

Serial Number – Displays the device serial number.

The Versions Table displays the following fields:

•

Model Name – Displays the device model name.

•

Hardware Version – Displays the installed device hardware version number.

•

Boot Version – Displays the current boot version running on the device.

•

Software Version – Displays the installed software version number.

2. Enter the System Name, System Location, System Contact and Idle Timeout in the 

provided fields.

3. Click Apply to update the system settings.

The IP Configuration screen contains fields for assigning IP addresses. IP addresses are either 
defined as static or are retrieved using the Dynamic Host Configuration Protocol (DHCP). The IP 
Interface screen also contains information for defining default gateways DHCP and is also 
configured from the IP Interface screen. The DHCP assigns dynamic IP addresses to devices on a 
network. DHCP ensures that network devices can have a different IP address every time the device 
connects to the network. 

Note the following when configuring IP Addresses:

•

If the device is accessed using SmartWizard Discovery, the IP address retrieved through 
DHCP is displayed.

•

If the device fails to retrieve an IP address through DHCP, the default IP address is 
192.168.0.239.