Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 관리자 가이드
MLD
627
Managed Switches
Web Interface: Configure MLD
MLD on Switch A
1.
Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
b. For Routing Mode, select the Enable radio button.
c. Click Apply.
2.
Enable IPv6 unicast routing on the switch.
a. Select Routing > IPv6 > Basic > Global Configuration.
A screen similar to the following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply.
3.
Configure 1/0/1 and 1/0/13 as a IPv6 routing ports.
a. Select Routing > IPv6 > Advanced > Interface Configuration.
A screen similar to the following displays.