Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Netgear
  4. M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3
  5. 관리자 가이드

Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 관리자 가이드

다운로드
페이지 중 688
Link Dependency 
660
Managed Switches 
CLI: Create a Link State Group
1. 
Create a link state group with group number 1.
2. 
Configure port 1/0/1 as an upstream link.
3. 
Configure port 1/0/5 as a downstream link.
4. 
Display the status of the link state group with group number 1.
Web Interface: Create a Link State Group
1. 
Configure the action for link state group with group number 1.
a. Select System > Link Dependency > Link Dependency Group Configuration.
A screen similar to the following displays.
(Netgear Switch) (Config)#link state group 1 action down
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#link state group 1 upstream
(Netgear Switch) (Interface 1/0/1)#interface 1/0/5
(Netgear Switch) (Interface 1/0/5)#link state group 1 downstream
(Netgear Switch) (Interface 1/0/5)#exit
(Netgear Switch) #show link state group 1
GroupId  Downstream Interfaces   Upstream Interfaces   Link Action   Group State
-------  ----------------------  --------------------  ------------  -----------
1        1/0/5                   1/0/1                 Link Down     Up