Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Netgear
  4. M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3
  5. 관리자 가이드

Netgear M4200-10MG-PoE+ (GSM4210P) - Multigigabit Managed Switch with 8*2.5G and 2x10G SFP+ Layer 3 관리자 가이드

다운로드
페이지 중 688
RIP 
90
Managed Switches 
Enable Routing for the Switch
The example is shown as CLI commands and as a web interface procedure.
CLI: Enable Routing for the Switch
Web Interface: Enable Routing for the Switch
1. 
Select Routing > IP > Basic > IP Configuration. 
A screen similar to the following displays.
2. 
For Routing Mode, select the Enable radio button.
3. 
Click Apply to save the settings.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#exit